一种提高卫星相对轨道运动全物理仿真逼真度的新方法

现有的卫星控制系统全物理仿真很少对卫星绕地球的轨道运动进行模拟,即使在卫星间相对轨道运动的全物理仿真中也没有考虑地心引力差和惯性力项的存在,因此其逼真度受到了影响.提出一种在共面圆轨道近距离卫星相对运动全物理仿真中引入地心引力差和惯性力项的方法,提高了物理仿真实验的逼真度.     

对无控旋转目标逼近的自适应滑模控制

对追踪器逼近无控旋转目标器的轨迹和姿态六自由度控制问题进行了研究.基于适用于任意偏心率的航天器相对运动轨道和姿态动力学模型,对追踪器逼近无控旋转目标的参考轨迹和参考姿态进行了分析与设计,推导了一种用于六自由度逼近控制的自适应滑模控制器.通过仿真分析,证明了所设计的逼近参考轨迹和参考姿态的合理性,同时验证了自适应滑模控制器的有效性.     

感应电动机寿命预测的加速退化试验方法研究

感应电动机正常使用时一般具有长寿命高可靠性,为在较短时间内预测感应电动机的寿命,提出了一种简单易行的感应电动机加速退化试验方法:在电动机转轴上偏心安装圆孔叶片模拟电动机负载工作时承受的不平衡载荷,并且通过改变叶片偏心安装孔的位置模拟增大不平衡载荷。进行了3种应力形式的试验研究,以试验中测得的电动机轴心轨迹面积值表征电动机的性能退化指标,建立了轴心轨迹面积相对变化的漂移Brown运动和幂律加速退化模型,利用无偏估计法和最小二乘法得到模型参数的估计,外推获得叶片无偏心安装状态下的不平衡重力矩,以该值作为电动机正常工作时承受的不平衡载荷,预测和分析了电动机正常工作寿命和可靠性,验证了加速退化试验方法的可行性和高效性。     

基于自适应滑模的变质心再入飞行器控制律设计

建立了有纵向单滑块的变质心再入飞行器系统控制模型。对该有输入非线性的快时变多体系统,考虑系统存在参数不确定等因素的影响并将完整的活动质量体动力学环节置入姿态控制,基于滑模控制理论设计了俯仰姿态跟踪鲁棒控制系统。在参数不确定性条件下对飞行控制系统进行了仿真。结果表明：设计的控制律可实现对指令角度和指令位置有效、快速、稳定...     

星载TDICCD相机像移对成像质量的影响分析

通过分析给出了偏流角变化、速高比变化和姿态精度导致的像移量及其与调制传递函数的对应关系,结合卫星轨道和相机参数,在不同积分级数下引起的像移对相机成像质量的影响进行了仿真.结果表明,随着积分级数的增加,像移对相机成像质量的影响越来越大,尤其表现为偏流角及速高比的变化.为此,在轨运行期间须对其采取补偿措施,为保证高质量的图...     

IGSO和MEO卫星用于TWSTFT的卫星运动误差研究

针对倾斜地球同步轨道（IGSO）和中高地球轨道（MEO）卫星用于卫星双向时间传递（TWSTFT）时的卫星运动所引入的误差进行了研究,并对IGSO和MEO卫星应用于TWSTFT的可行性进行了分析。首先推导了TWSTFT中的卫星运动误差公式,并利用两行根数（TLE）对目前在轨的IGSO和MEO卫星的运动进行了计算,在此基础...     

Periodic relative orbits of two spacecraft subject to differential gravity and electrostatic forcing

Coulomb forces between charged close-flying satellites can be used for formation control, and constant electric potentials enable static equilibria solutions. In this work, open-loop time-varying potential functions, which produce periodic, two-craft, Coulomb formation motions are demonstrated for the first time. This is done in the rotating Hill-Frame, with linearized gravity, and craft position components assumed in the form of simple harmonic oscillators. Substitution of the oscillatory functions into the dynamics, further constrains these functions, and yields necessary potential histories, to produce the periodic flow. The assumed position functions, however, are not arbitrary, since the dynamical model restricts what oscillatory trajectories are allowed. Specifically, a Hill-Frame integral of motion is derived, and this is used to show certain candidate periodic functions to be inadmissible. The system dynamics are then linearized to expose stability properties of the solutions, and it is established that asymptotic stability is impossible for all orbit families. Finally, the degree of instability in the assumed motions, over free parameter ranges, is determined numerically via the Floquet multipliers of the associated full-cycle state-transition matrices.     

Refining DORIS atmospheric drag estimation in preparation of ITRF2008

In preparation of ITRF2008, all geodetic technique services (VLBI, SLR, GPS and DORIS) are generating new solutions based on combination of individual analysis centers solutions. These data reprocessing are based on a selection of models, parameterization and estimation strategy unique to each analysis center and to each technique. While a good agreement can be found for models between groups, thanks to the existence of the IERS conventions, a great diversity still exist for parameter estimation, allowing possible future improvements in this direction. The goal of this study is to focus on the atmospheric drag estimation used to generate the new DORIS/IGN ignwd08 time series prepared for ITRF2008. We develop here a method to inter-compare different processing strategies. In a first step, by analyzing single-satellite solutions for a few weeks of data but for a large number of possible analysis strategies, we demonstrate that estimating drag coefficient more frequently (typically every 1–2 h instead of previously every 4–8 h) for the lowest DORIS satellites (SPOTs and Envisat) provides better geodetic results for station coordinates and polar motion. This new processing strategy also solved earlier problem found when processing DORIS data during intense geomagnetic events, such as geomagnetic storms. Differences between drag estimation strategies can mostly be found during these few specific periods of extreme geomagnetic activity (few days per year). In such a case, when drag coefficient is only estimated every 6 h or less often for single-satellite solution, a significant degradation in station coordinate accuracy can be observed (120 mm vs. 20 mm) and significant biases arose in polar motion estimation (5 mas vs. 0.3 mas). In a second step, we reprocessed a full year of DORIS data (2003) in a standard multi-satellite mode. We were able to provide statistics on a more reliable data set and to strengthen these conclusions. Our proposed DORIS analysis is easy to implement in all software packages and is now already used by several analysis centers of the International DORIS Service (IDS) when submitting reprocessed solutions for ITRF2008.     

力值加载装置控制系统设计

针对力标准机不适用于力值现场校准测试的问题,设计了一种便携式的力值加载装置。该装置采用STM32F103为主控单片机,采用高准确度AD转换器测量力值,优化了力值加载控制算法,避免了力值加载过程中可能出现的各种问题。该装置控制速度快,准确度高,适用于力值现场校准测试。     

In Memoriam: Herbert L. Pick,Jr. (1930–2012)

ABSTRACT

Fictive motion in language (as in “the ridge went north”) is claimed to reflect the attention focus of the observer on the extension and spatial layout of an entity. This paper investigates fictive motion in alpine narratives, which describe the experience of moving in a very specifically structured space. We examine space properties that are highlighted through fictive motion in this specific context and describe how they go beyond spatial extension. We further report the communicative motivation behind the use of fictive motion, ranging from conveying the sense of place to encoding the full spatial footprint of a motion event.